AWR-ERM100-4I – 923351/923352

Product #:
923351/923352
Model #:
AWR-ERM100-4I

The AWR-ERM100-4I is a standalone alarm notification device that can monitor up to 4 independent inputs. These 4 inputs can be connected to dry relay contacts and can be configured for normally open (N/O) or normally closed (N/C). Alarm notifications are transmitted across an Analog UHF radio channel. Each input can be configured for different radio channels if needed.

 

Backplane Assembly with Screw Terminal
923351

Backplane Assembly with Screw Terminal and Punch Down Block
923352

For Pricing & Questions

Existing Customers

Features

  • Two transmit power settings; Low (.5W), High (2W), per channel
  • Custom ‘alarm’ message audio
  • Custom ‘alarm clear’ message audio
  • Analog UHF (450 – 470MHz)
  • 12.5KHz channel spacings (Narrow band)
  • Tone/Code Signaling: CTCSS and DCS, IDCS capable
  • Audio Companding configurable by channel
  • 16 channels available, one channel per input
  • Scramble available, per channel
  • External antenna connector
  • Enhanced antenna system for increased range
  • Compact local antenna
  • Independent channel selection per input (1 of 16 available)
  • Available Alert Tone per channel, 9 alert tones to choose from
  • N/O or N/C Input Polarity
  • Busy Channel Lockout (BCL), channel monitoring before transmit, will suspend transmission of message until channel is clear to prevent transmission collisions.
  • Programmable squelch levels to influence receiver sensitivity
  • Selectable time duration between alarm notification transmissions
  • 10S, 30S, 45S, 60S, 90S, 2M, 5M, 10M
  • Selectable radio message repeats per alarm transmission: None, 1, 2, 3
  • Selectable transmission repeats during active alarm: 1 thru 10, continuous
  • Power indicator
  • Screw terminal or optional punch-down block connection
  • Audio storage card
  • .wav or .mp3 audio files
  • No limit on message length
  • 16 available message files (one per input alarm, one per input clear)
  • Click and drag to add audio files to storage card via USB cable
  • Selectable transmission interval for continued alarm notifications
  • Pre-assembled onto a 9” x 9” backplane for easy installation

Specifications

  • Black Housing
  • 1.25” x 3.13” x 5.7”; 7.43 oz
  • Detachable Antenna
  • Power Requirement: 12V, 2 amp
  • Transmitter Power: .5 / 2 Watts
  • 16 Channels
  • FCC ID: Q9SAWR-ERM100
  • IC: 4651A-AWRERM100
  • Operating Frequency Range: 450 – 470 MHz
  • Frequency Separation: 12.5 KHz
  • Tone / Code Signaling: CTCSS / DCS
  • Transmit Time-out Timer: 30 to 300 seconds or Off
  • RF Connector: BNC FM
  • DC Power Connector: 2.1 mm
  • Antenna Impedance: 50 Ohm
  • Modulation: 11K0F3E
  • Deviation: +/- 2.5K
  • Spurious & Harmonics: ≤-36 dBm
  • Companding: By Channel
  • Audio Response: 300 – 3000 Hz
  • FM Noise: ≥45 dB
  • Duty Cycle: 50 / 50
  • Audio Power Output: 500 mW
  • Sensitivity (12 dB SINAD): .25 μV
  • Selectivity (EIA): 60 dB
  • Image Rejection (EIA): 80
  • Intermodulation Rejection (EIA): 65 db
  • Frequency Stability: +/- 2.5ppm
  • 2 Year Warranty

Documentation

Kits

Backplane Assembly with Screw Terminal
923351

Backplane Assembly with Screw Terminal and Punch Down Block
923352